Spindle & tooling
The connection between your machine and the cut. Select holding, retention and reach around the application.
WORKHOLDING · METROLOGY · CHIP & COOLANT · MACHINE SERVICES
Engineering solutions forCNC manufacturing.
Workholding, tooling, probing, calibration and chip & coolant systems from global technology leaders. Selected, installed and serviced by engineers in Bengaluru.
View SHK company profilePrecisionProductivityUptime
TECHNOLOGY WE WORK WITH
DetronTaeguTecSolidCAMMarpossOilmaxAir SeikiVGS & CoDIXI
01 — START WITH THE PROBLEM
What are you trying to solve?
Pick the challenge. We match the right technology. You don’t need to know the product name.
01
My machine has lost accuracy
Part dimensions drifting, poor circularity or alignment concerns.
02
Setups take too long
Too much time clamping, re-indexing and aligning the part.
03
The part is hard to hold
Bores, gears and complex shapes that need a better grip.
04
Chips & coolant cost us money
Swarf building up, contaminated fluid and frequent sump changes.
05
The machine keeps stopping
Worn spindles, machine elements and ageing subsystems.
06
We need more from the same machine
Reach another face. Add an axis. Improve the machining cycle.
02 — EXPLORE THE MACHINE
Every zone of your machine. One partner.
Select a point on the machining centre to see what SHK supplies and services there.
VERTICAL MACHINING CENTRE · FRONT VIEW09 CONNECTED ZONES
Probing & tool breakage
Locate the part, set the tool and monitor breakage during the machining cycle.
Rotary axes
Bring another face into the cut with a rotary or tilting table.
Fixtures & clamping
Make the workholding fit the component, from vices to dedicated fixtures.
Axes & machine accuracy
Investigate axis errors, circularity and machine geometry.
Chip conveyors & compactors
Move and compact swarf after it leaves the cutting zone.
Coolant & oil filtration
Address contaminated coolant with cleaning, separation and filtration.
Oil mist collection
Collect oil mist around the machine enclosure.
CAM / programming
Prepare milling, turning and multi-axis programmes around the part.
01Spindle & tooling
The connection between your machine and the cut. Select holding, retention and reach around the application.
02Probing & tool breakage
Locate the part, set the tool and monitor breakage during the machining cycle.
03Rotary axes
Bring another face into the cut with a rotary or tilting table.
04Fixtures & clamping
Make the workholding fit the component, from vices to dedicated fixtures.
05Axes & machine accuracy
Investigate axis errors, circularity and machine geometry.
06Chip conveyors & compactors
Move and compact swarf after it leaves the cutting zone.
07Coolant & oil filtration
Address contaminated coolant with cleaning, separation and filtration.
08Oil mist collection
Collect oil mist around the machine enclosure.
09CAM / programming
Prepare milling, turning and multi-axis programmes around the part.
03 — PRODUCT RANGE
For the spindle, the table and everything around it.
DETRON · ROTARY AXES
Rotary & tilting tables
Access more faces of the part with rotary tables, tilting tables and support tailstocks.
HYDRAULIC · PNEUMATIC
Fixtures & clamping
Build the setup around the part, with dedicated fixtures, vices and vacuum clamping.
SPINDLE INTERFACE
Tool holders & pull studs
Tool holding and retention components selected for your machine interface.
REACH · ORIENTATION
Custom angle heads
Reach a different face or angle with a head configured around the application.
TURNING · MACHINING
Probing & tool breakage
Touch probes, tool setting and breakage sensing for the machining cycle.
PRECISION WORKHOLDING
Mandrels & chucks
Hold bores, gears and shaped components with application-specific workholding.
CHIP HANDLING
Chip conveyors
Move swarf away from the cut with a conveyor matched to the chip and machine.
SUMP · OIL · FILTERS
Coolant, sump cleaning & filtration
Sump cleaning and coolant recovery solutions for removing sludge, chips and swarf from machine coolant systems.
04 — MACHINE ACCURACY SERVICE
Measure. Compensate. Verify.
CIRCULARITY / XY PLANE
AS MEASUREDILLUSTRATIVE PLOT · NOT CUSTOMER DATA
01
Measure
Laser and ball-bar tests measure the machine for positioning and circularity errors.
02
Compensate
Measured errors can be compensated in the control to restore machine accuracy.
03
Verify
A repeat test verifies the result and confirms the improvement.
TURNING · MACHINING · GRINDING MACHINES
Book a calibration visit05 — CHIP & COOLANT
Cleaner sumps. Denser scrap. Less downtime.
SUMP CLEANING
Keep the fluid working.
- No filter element to replace
- Reduced coolant consumption
- Extended coolant change period
- Reduced machine downtime
- Improved product finish
CHIP COMPACTION / VCC SERIES
Make more of the swarf.
Chip compactor specifications
| Model | VCC 12-110 | VCC 10-150 |
|---|---|---|
| Briquette size | Ø100 × 50 mm | Ø75 × 50 mm |
| Hydraulic force | 110 T | 150 T |
| Electric motor | 15 HP | 15 HP |
| Cycle time | 25 s | 30 s |
| Machine size (L × W × H), mm | 1700 × 1900 × 2350 | 1700 × 2000 × 2350 |
Aluminium, MS, cast iron, brass, copper, SS burr and grinding dust.
View compaction range ↗06 — THE LIFE OF YOUR MACHINE
From first setup to second life.
APPLICATION CONTEXT
Examples of manufacturing sectors where these CNC technologies are commonly applied.
07 — TALK TO AN ENGINEER
Send us the part, the drawing or the problem.
Send your technical enquiry securely to the SHK team, view relevant catalogues and continue the conversation on WhatsApp. If the online service is unavailable, you can still contact SHK directly.
- PHONE
- +91 86600 36390
- shktechservices@gmail.com
- VISIT
- No. 46, 2nd Floor, 14th Cross Road, Opp. CLAAS Agricultural Machinery Pvt. Ltd., 2nd Stage Peenya, Bengaluru – 560058